Float Valve (Flapper Type Check Valve)

Float Valve (Flapper Type Check Valve)

This Float Valve is normally installed in a standard bore-back of the bit sub, to provide fluid flow control at the bottom of the drill stem. It also prevents backflow of cuttings from plugging the drill bit jets while making connections.    When the flapper is held open by the built-in latch, the drill pipe fills from the bottom, This eliminates the mess and lost time of filling operations, Running in with the flapper open also reduces the potential of formation damage from pressure surges caused by the bit acting as a piston or ram as it is lowered into the hole. The flapper latch is automatically released by initial circulation of drilling fluid through the valve.

    During normal circulation, the flapper is fully opened and out of the way. The large bore of the valve provides minimum flow restriction.

    When circulation is stopped, the flapper is closed by the flapper spring, preventing backflow through the bit.

    When run in the closed position, the valve allows the drill pipe to be floated in while only partially filled with drilling fluid. This lowers the effective weight of the drill string and reduces strain on rig equipment.

Specifications

Dia. of Valve Assembly	Length of Valve Assembly	Dia. of Float Recess	Sub Box		Other Popular connections
			Type	Depth of Recess	Type	Depth of Recess
42.07	149.23	42.86	2-3/8REG	231.78	NC23	231.78
61.12	165.1	61.91	3-1/2REG	266.7	NC31	260.35
79.375	254	80.17			NC38	361.95
88.11	211.14	88.9	4-1/2REG	325.44	NC44	331.79
98.425	247.65	99.22	5-1/2REG	374.65	NC50	368.3
121.44	298.45	122.24	6-5/8REG	431.8	5-1/2IF	431.8
121.44	298.45	122.24	7-5/8REG	431.8

Drill stem tools,Coring tools ,Fishing tools,Jars tools,Cementing tools,Milling tools,Accessory tools,,Workover tools.......

Float Valve (Flapper Type Check Valve)